The product has been added to your shopping cart Show shopping cartCheckout
0 Products
Cart
Your browser is not supported. For the best experience, a newer version or another browser is recommended.

Lubricants

Grease - Blasolube 301
2404145

BLASOLUBE® 301

universal lubricant grease for a very wide-ranging use.

Excellent for high pressure applications.


– Soft consistency

– Temperatures use range : from -30° C up to +120/150° C.

Buy
Grease Isoflex NBU-15
2455950

ISOFLEX NBU 15

Spindle bearing grease


Your benefits at a glance

  • Tried and tested over many years especially in high-speed applications
  • Longer component life due to optimized wear protection and good pressure absorption capacity
  • Excellent resistance to water and media as well as above-average anticorrosive additives protect bearings against premature failure, thus helping to minimize repair costs
  • Low intrinsic bearing heat due to low lubricant friction enabling longer service life
  • Uninterrupted machine operation due to good pumpability and metering in customary centralized lubricating systems

ISOFLEX NBU 15

is a high-speed grease with a good pressure absorption capacity.
 
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.

Applications:
ISOFLEX NBU 15 is primarily used for spindle bearings and highspeed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a long-term grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical valve actuators).

Application notes:
The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the many elastomer and plastic compositions, we recommend checking the grease's compatibility prior to series application with elastomers or plastics.
Buy
2455952

ISOFLEX TOPAS AK 50

Low-temperature lubricating grease for plastic components 


Your benefits at a glance:

  • Lubricant for plastic components
  • High-speed grease
  • Good corrosion protection
  • Resistant to oxidation and ageing
  • Good surface wetting

Your requirements - our solution:

ISOFLEX TOPAS AK 50

consists of synthetic hydrocarbon oil and aluminium complex soap.

It protects against corrosion and is resistant to oxidation and ageing.

In addition, it has good wetting properties and low internal lubricant friction.


Application:

ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures.

It can also be used in small gears and plastic/steel as well as plastic/plastic components.

It is compatible with many thermoplastics.

Buy
Grease NSK LR3 - A98L-0001-0465/2
2456800

NSK Grease LR3

Contains a special synthetic oil for high temperature stability and a carefully selected anti-oxidant agent.
This grease dramatically increases lubrication life under high temperature conditions.
It is used for high speed, medium load.
Lubrication life exceeded 2 000 hours in the endurance test at 150°C.
Its rust prevention capacity in severe conditions such as water and moist environments is further strengthened.

 

APPLICATION:

NSK Grease LR3

is a standard grease for balls screws PSS type (shaft dia. 15 mm or over), FSS type and VFA type.
Its ideal for operation with medium load at high speed such as positioning in high tact material handling equipment.

Buy