The product has been added to your shopping cart Show shopping cartCheckout
0 Products
Cart
Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

IONOVIT S

for fast hole drilling

IONOVIT S is a high-performance dielectric designed for economic and fast working from an electrode diameter of 0,5 mm. It is also suitable for the processing of aluminum. Work pieces made of ferrous metals are temporarily protected from corrosion.

IONOVIT S is a ready-to-use product. The concentration is regulated using a hand refractometer: The refractometer display for the ready-to-use IonoVit S is 7,0 % Brix.

Measuring device:

  • Refractometer 7% Brix (water down only with deionised water)

Peripheral requirement:

Water treatment

  • Dielectric aggregate with filter

  • Integrate the cooling coil into the cooling system – recommended for reproducible quality (option)

  • Normal electrode quality is sufficient

IONOVIT S

Your benefits

  • Free of heavy metal and chlorine compunds

  • Low electrode wear

  • No foaming

  • Little time exposure during drilling

  • Temporary corrosion protection

  • Mild in odour

IONOVIT 0

For precision hole drilling

This new development by oelheld, a water-based medium which contains proper additives, guarantees the manufacturing of reproducible and high-quality holes for electrode diameters of 0,1 – 3,0 mm and larger.

IONOVIT 0 is delivered ready-to-use. The brix-value is in a range of 5% – 7%. A dielectric aggregate (water treatment) is necessary, which is responsible for a good quality in cooperation with the mixedresin cartridge. The medium should be cooled as otherwise a steady performance cannot be reached.

Measuring device:

  • Refractometer 5% – 7% Brix (water down only with deionised water)

  • Conductivity meter: conductance 0 – 10 μS/cm

  • pH-value test strip 5 – 7

Peripheral requirement:

Water treatment

  • Dielectric aggregate with filter and deionised resin absolutely necessary

  • Integrate the cooling coil into the cooling system – recommended for reproducible quality (option)

  • Good electrode quality (electrode with bar)

IONOVIT 0

Your benefits

Steel machining

  • No corrosion formation

  • Free of heavy metal and chlorine compounds

Carbide machining

  • No visible cobalt leaching at bore entrance

  • Technological changes at the machine are not necessary

  • No machine soiling

  • Free of heavy metal and chlorine compounds

Distinction

Drill holes in steel and carbide (electrodes ø 1,5mm)

 

Electrode wear

Corrosion

 

Cleanness

 

Benefits of IONOVIT S against deionised water / IONOVIT 0

 

Benefits of IONOVIT S against deionised water / IONOVIT 0

 
Dielectric fluid - IONOVIT S
04.02.346

IONOVIT S

for FAST start hole drilling

IONOVIT S is a high-performance dielectric designed for economic and fast working from an electrode diameter of 0,5 mm. It is also suitable for the processing of aluminum. Work pieces made of ferrous metals are temporarily protected from corrosion.

IONOVIT S is a ready-to-use product. The concentration is regulated using a hand refractometer: The refractometer display for the ready-to-use IonoVit S is 7,0 % Brix.

Measuring device:

  • Refractometer 7% Brix (water down only with deionised water)

Peripheral requirement:

  • Water treatment
  • Dielectric aggregate with filter
  • Integrate the cooling coil into the cooling system - recommended for reproducible quality (option) -
  • Normal electrode quality is sufficient

IONOVIT S is particularly characterized by:

  • Free of heavy metal and chlorine compunds
  • Low electrode wear
  • No foaming
  • Little time exposure during drilling
  • Temporary corrosion protection
  • Mild in odour
Buy
Dielectric fluid - IONOVIT 0
04.02.348

IONOVIT 0

for high-quality precision bores

This water-based product with additives guarantees the production of reproducible and high-quality holes for electrode diameters of 0.1 - 3.0 mm and larger. IonoVit 0 is supplied ready for use, so mixing is not necessary. The Brix value is in the range of 5% - 7%. A dielectric aggregate (water treatment) is required which, in conjunction with a mixed resin cartridge, ensures good quality and maintains the water conductance at less than 10 µS/cm. If the water conductance increases, the mixing resin cartridge must be replaced. Furthermore, the medium should be cooled, as otherwise no constant performance is achieved.

Measuring device:

Refractometer 5% - 7% Brix (water down only with deionised water)

Conductivity meter: conductance 0 - 10 μS/cm

pH-value test strip 5 - 7

Peripheral requirement:

  • Water treatment

  • Dielectric aggregate with filter and deionised resin absolutely necessary

  • Integrate the cooling coil into the cooling system - recommended for reproducible quality (option) -

  • Good electrode quality (electrode with bar)

IONOVIT 0 is particularly characterized by:

Steel machining:

  • No corrosion formation

  • Free of heavy metal and chlorine compounds

Carbide machining:

  • No visible cobalt leaching at bore entrance

  • Technological changes at the machine are not necessary

  • No machine soiling

  • Free of heavy metal and chlorine compounds

Buy