The product has been added to your shopping cart Show shopping cartCheckout
0 Products
Cart
Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

ECOSPARK 105

Affordable performance

is a blended aliphatic hydrocarbon fluid of high purity based on mineral oils for use in EDM machines. It was especially developed for use in applications where a minimum dielectric flashpoint of 100°C is required as a security against fire risks. Dielectric ECOSPARK 105 is made of synthetic hydrocarbons forming an oil of low viscosity, high dielectric strength and a very low aromatic content below 0,1 %vol. All components are carefully selected for purity, low toxicity, low odour and lack of irritation. Due to its high evaporation temperature of 235°C the gases produced as a by-product of EDMing are considerably reduced.

ECOSPARK 105

is an odourless and colourless fluid. It has excellent cooling and flushing properties because of its low viscosity of 3,3 mm²/s at 20°C. Further, it has an excellent filterability through all types of EDM filter systems. Thus it ensures an efficient sparking process, combining high stock removal rates with low electrode wear. This guarantees a wide operating range from finishing to heavy roughing using high generator output.

Our ECOSPARK 105 is especially characterized by:

  • faster machining

  • less edge and surface wear of the electrode

  • increased surface finish

  • less refill quantity

Dielectric oil - ECOSPARK 105
04.02.330

ECOSPARK 105

Affordable performance

Dielectric ECOSPARK 105 provides an efficient EDM process and combines a high removal volume with low electrode wear. This guarantees a wide range of applications from precision machining to heavy roughing work with high generator power. It is particularly suitable for applications where a minimum flash point of 100 degrees Celcius is required.

In addition, the high boiling point significantly reduces steam formation during the spark ignition process. Filtration is easily possible with all filters commonly used in spark erosion.

Your advantages:

  • High degree of metal removal
  • Wear reduction
  • Wide range of applications
  • Small refill quantities
  • High flash point of >100 °C (212 °F)
  • Good cooling and flushing properties
Buy
Dielectric oil - ECOSPARK 105
04.02.331

ECOSPARK 105

Affordable performance

Dielectric ECOSPARK 105 provides an efficient EDM process and combines a high removal volume with low electrode wear. This guarantees a wide range of applications from precision machining to heavy roughing work with high generator power. It is particularly suitable for applications where a minimum flash point of 100 degrees Celcius is required.

In addition, the high boiling point significantly reduces steam formation during the spark ignition process. Filtration is easily possible with all filters commonly used in spark erosion.

Your advantages:

  • High degree of metal removal
  • Wear reduction
  • Wide range of applications
  • Small refill quantities
  • High flash point of >100 °C (212 °F)
  • Good cooling and flushing properties
Buy