In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
search.pngiq drill.jpg

TanSpark tungsten carbide tubes - iQ Drill is mainly used for machining difficult and heat-resistant materials, or when hole drilling must be performed with extreme precision such as hole drilling of fuel injection nozzles. The diameter of the flush hole is adapted to the respective outer diameter. This is to reduce tip formation and at the same time improve the flow through the electrode.

All electrodes are controlled by measuring the air flow at 6 Bar pressure in addition to control of very tight manufacturing tolerances.

By default, the tolerance of the outer diameter is within a few thousandths of a millimeter.

TanSpark tungsten carbide tubes - iQ Drill are made of ultra-fine tungsten powder and a high-grade cobalt bond.

Search in results
Number of hits 24
Display per page1020all
Page 1 of 3
TanSpark® Carbide tube - iQ Drill
Ø 0.10/0.03 x 150 mm
03.30.150.0010
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.12/0.03 x 150 mm
03.30.150.0012
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.15/0.03 x 150 mm
03.30.150.0015
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.20/0.07 x 150 mm
03.30.150.0020
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.12/0.03 x 300 mm
03.30.300.0012
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.15/0.03 x 300 mm
03.30.300.0015
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.20/0.07 x 300 mm
03.30.300.0020
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.30/0.12 x 300 mm
03.30.300.0030
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.35/0.12 x 300 mm
03.30.300.0035
Buy
TanSpark® Carbide tube - iQ Drill
Ø 0.40/0.12 x 300 mm
03.30.300.0040
Buy
Page 1 of 3
Ads
0 Products