In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Search in results
Number of hits 4
0402260
Reiniger SC - 500ml
Buy

Reiniger SC

Cleaner to remove emission deposits during maintenance and repair of moulds.

During plastics processing, deposits develop on the tool and may impair the quality of moulded parts.

These deposits are decomposition products of plastics or the contained additives such as stabilisers, flame-retardant additives, static inhibitors and propellants.

The formation of deposits is even accelerated by a high melt temperature and poor tool ventilation.

Reiniger SC contains highly active solvents in a concentrated form and removes these emission deposits of most available plastics.

Due to its highly concentrated form, Reiniger SC is especially suitable for cleaning dismantled and cooled tools manually.

Ejector guides are not impaired as greases are not released.

In multiphase processes to remove rust from, clean and preserve moulds and clamping plates, Reiniger SC is the second step to remove polymer residue and carbonised greases.

Reiniger SC contains no highly volatile solvents, is soluble in water and biodegradable.

star_empty.pngstar_empty.pngstar_empty.pngstar_empty.pngstar_empty.png
0402270
Reiniger SE - Mould Cleaner
Buy

Broad-spectrum mould cleaner during the injection moulding process (without machine downtimes).

During plastics processing, deposits develop on the tool and may impair the quality of moulded parts.

These deposits are decomposition products of plastics or the contained additives such as stabilisers, flame-retardant additives, static inhibitors and propellants.

The formation of deposits is even accelerated by a high melt temperature and poor tool ventilation.

Reiniger SE contains a combination of special solvents and, when applied in good time, removes deposits from tools without significantly disturbing the production.

The cleaner is applied by spraying the tool and wiping it after a brief exposure time or by injection with a few moulded parts.

The optimal application temperature is between 60 °C and 120 °C.

Reiniger SE does not release mineral grease and hence does not impair the sliding properties of ejectors and sliders.

Reiniger SE is soluble in water, biodegradable, free from chlorine compounds and reprotoxic substances.

star_empty.pngstar_empty.pngstar_empty.pngstar_empty.pngstar_empty.png
0402320
Interkor VP1026
Buy

Interkor VP1026

saves time and money

Many plastics processing companies know the problems every material and colour change involves. On the one hand, the costly procedure takes much time; on the other hand, the cleaning of cylinder and screw requires substantial amounts of material: in the first step, the process is switched to the cleaning granulate and then to the plastic material used next.

The consequences are long downtimes, considerable amounts of material used and associated high costs. Moreover, many cleaning granulates are extremely expensive, require much storage space and are material specific. Also annoying: abrasive cleaners roughen the polished surfaces of the plasticising unit.

And as if these excessively expensive and time-consuming processes were not unpleasant enough, the use of the cleaners is anything but harmless – because reactive cleaning processes produce harmful vapours and gases that may be a threat to employees and the environment!

 

Interkor VP1026: Fast! Reliable! And harmless!

 

The answer to these challenges is Interkor VP1026. The liquid cleaner also contains a corrosion inhibitor for plasticising units of plastic processing machines. The exceptionally efficient cleaning additive is based on a smart mode of action: directly added to the subsequent granulate, it abruptly foams up under pressure. This expansion of volume displaces the previous material, the cleaner adheres to colour and material residues and brings them out with a few shots.

 

After cleaning, a repeated change of material is not necessary. Hence, thanks to Interkor VP1026, your change of material or colour will not only consume less material but also around 30 % to 40 % less time. In short: you will save money!

 

The purely physical process that does not release any harmful vapours can be applied for cleaning cylinders, screws and hot runners, because Interkor VP1026 is absolutely compatible with all materials and temperatures. Hot-runner cleaning ideally is done in two steps: during the first step, only the plasticising unit is cleaned. In the second step, the nozzle is connected to the mould, so the foamed product can be injected through the open mould.

 

Interkor VP1026: approved for the food industry

 

Interkor VP1026 only contains harmless ingredients. This was also confirmed by the US-American National Sanitation Foundation (NSF), which registered Buchem’s product for H2. Thus, the liquid cleaner and corrosion inhibitor is safe to be used to produce packagings in the food and medical industries.

 

You also want to benefit from a fast and safe material and colour change? Simply contact us!

 

star_empty.pngstar_empty.pngstar_empty.pngstar_empty.pngstar_empty.png
Ads
0 Products