The product has been added to your shopping cart Show shopping cartCheckout
0 Products
Cart
Your browser is not supported. For the best experience, a newer version or another browser is recommended.
In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

LUBRICANTS

LubTool® 2000 - NSF H1 registered
04.02.208

LubTool® 2000

Lubricating and fine oil for the food and pharmaceutical industry


LubTool® 2000 is used for greasing, removing, preserving and cleaning in all application fields, even in technically unpreventable, occasional contact with food.

LubTool® 2000 is NSF H1 registered.


Advantages:

LubTool® 2000 offers the best temporary corrosion protection on metallic surfaces and guarantees excellent lubrication of mechanical elements even at extreme minus temperatures.

LubTool® 2000 cleans oil and grease polluted surfaces, effortlessly removes fretting corrosion and is neutral to all usual plastics and elastomers.

LubTool® 2000 is free of silicon, acids and resins.


Application:

Rub LubTool® 2000 in circles to remove the fretting corrosion and clean with a cloth afterwards. Repeat this if necessary.

Buy
Grease - Blasolube 301
2404140

BLASOLUBE® 301

universal lubricant grease for a very wide-ranging use.

Excellent for high pressure applications.


– Soft consistency

– Temperatures use range : from -30° C up to +120/150° C.

Buy
Grease - Blasolube 301
2404145

BLASOLUBE® 301

universal lubricant grease for a very wide-ranging use.

Excellent for high pressure applications.


– Soft consistency

– Temperatures use range : from -30° C up to +120/150° C.

Buy
Grease - Blasolube 301
2454950

BLASOLUBE® 301

universal lubricant grease for a very wide-ranging use.

Excellent for high pressure applications.


– Soft consistency

– Temperatures use range : from -30° C up to +120/150° C.

Buy
Grease Isoflex NBU-15
2455950

ISOFLEX NBU 15

Spindle bearing grease


Your benefits at a glance

  • Tried and tested over many years especially in high-speed applications
  • Longer component life due to optimized wear protection and good pressure absorption capacity
  • Excellent resistance to water and media as well as above-average anticorrosive additives protect bearings against premature failure, thus helping to minimize repair costs
  • Low intrinsic bearing heat due to low lubricant friction enabling longer service life
  • Uninterrupted machine operation due to good pumpability and metering in customary centralized lubricating systems

ISOFLEX NBU 15

is a high-speed grease with a good pressure absorption capacity.
 
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.

Applications:
ISOFLEX NBU 15 is primarily used for spindle bearings and highspeed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a long-term grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical valve actuators).

Application notes:
The lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the many elastomer and plastic compositions, we recommend checking the grease's compatibility prior to series application with elastomers or plastics.
Buy
2455952

ISOFLEX TOPAS AK 50

Low-temperature lubricating grease for plastic components 


Your benefits at a glance:

  • Lubricant for plastic components
  • High-speed grease
  • Good corrosion protection
  • Resistant to oxidation and ageing
  • Good surface wetting

Your requirements - our solution:

ISOFLEX TOPAS AK 50

consists of synthetic hydrocarbon oil and aluminium complex soap.

It protects against corrosion and is resistant to oxidation and ageing.

In addition, it has good wetting properties and low internal lubricant friction.


Application:

ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures.

It can also be used in small gears and plastic/steel as well as plastic/plastic components.

It is compatible with many thermoplastics.

Buy
Grease Centoplex CX 4/375 AU
2455953

CENTOPLEX CX 4 375 AU

High-speed grease for gears


Your benefits at a glance

  • For small gears subject to high peripheral speeds
  • Shear stable
  • Good oil separation at low temperatures

CENTOPLEX CX 4/375 AU

is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
 
Application:
Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders.
At temperatures < 80°C long-term lubrication is possible.

CENTOPLEX CX 4/375 AU
can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.
Lubrication is also possible by providing a grease sump in the gear.
Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured.
CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.
Buy
2455954

CENTOPLEX CX 4 375 AU

High-speed grease for gears


Your benefits at a glance

  • For small gears subject to high peripheral speeds
  • Shear stable
  • Good oil separation at low temperatures

CENTOPLEX CX 4/375 AU

is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
 
Application:
Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders.
At temperatures < 80°C long-term lubrication is possible.

CENTOPLEX CX 4/375 AU
can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.
Lubrication is also possible by providing a grease sump in the gear.
Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured.
CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.
Buy
Grease Microlube GBU-Y 131
2455955

MICROLUBE GBU-Y 131

Special grease for the lubrication of rolling and plain bearings subject to humidity and water


Your benefits at a glance:

  • Good pressure absorption capacity
  • High resistance to water
  • Good corrosion protection

Your requirements - our solution:

MICROLUBE GBU-Y 131

is a special grease incorporating a semi synthetic base oil and metal complex soap thickener.

This special combination greatly influences the load carrying capacity, water resistance and corrosion protective characteristics of the grease.


Application:

MICROLUBE GBU-Y 131 is intended for the lubrication of plain and rolling bearings operating under medium to high loads as well as under the influence of humidity and water.

MICROLUBE GBU-Y 131 has proven particularly successful for lubrication of the fixed or detachable rope grips of ski lifts.

Buy
Grease - Centoplex CX 4/375 AU
2455956

CENTOPLEX CX 4 375 AU

High-speed grease for gears


Your benefits at a glance

  • For small gears subject to high peripheral speeds
  • Shear stable
  • Good oil separation at low temperatures

CENTOPLEX CX 4/375 AU

is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.
 
Application:
Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders.
At temperatures < 80°C long-term lubrication is possible.

CENTOPLEX CX 4/375 AU
can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.
Lubrication is also possible by providing a grease sump in the gear.
Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured.
CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.
Buy
Grease Isoflex Topas AK 50
2455957

ISOFLEX TOPAS AK 50

Low-temperature lubricating grease for plastic components 


Your benefits at a glance:

  • Lubricant for plastic components
  • High-speed grease
  • Good corrosion protection
  • Resistant to oxidation and ageing
  • Good surface wetting

Your requirements - our solution:

ISOFLEX TOPAS AK 50

consists of synthetic hydrocarbon oil and aluminium complex soap.

It protects against corrosion and is resistant to oxidation and ageing.

In addition, it has good wetting properties and low internal lubricant friction.


Application:

ISOFLEX TOPAS AK 50 is suitable for the lubrication of plain and rolling bearings operating at high and/or low temperatures.

It can also be used in small gears and plastic/steel as well as plastic/plastic components.

It is compatible with many thermoplastics.

Buy
Grease NSK LR3 - A98L-0001-0465/2
2456800

NSK Grease LR3

Contains a special synthetic oil for high temperature stability and a carefully selected anti-oxidant agent.
This grease dramatically increases lubrication life under high temperature conditions.
It is used for high speed, medium load.
Lubrication life exceeded 2 000 hours in the endurance test at 150°C.
Its rust prevention capacity in severe conditions such as water and moist environments is further strengthened.

 

APPLICATION:

NSK Grease LR3

is a standard grease for balls screws PSS type (shaft dia. 15 mm or over), FSS type and VFA type.
Its ideal for operation with medium load at high speed such as positioning in high tact material handling equipment.

Buy
Grease NSK AS2
2456801

NSK Grease AS2

is an environmentally friendly and widely used grease for high load applications. It is a mineral oil based grease containing lithium thickener and several additives. It is superb in load resistance as well as stabile to oxidation. It not only maintains good lubrication over a long period of time, but also demonstrates superb capability in retaining water. Even containing a large amount of water, it does not lose grease when softened.

 

APPLICATION:
NSK Grease AS2

is a standrad grease for general NSK linear guides, balls screws and monocarriers. It is prevalently used in many applications becasue of it's high base oil viscosity, high load resistance and stability in oxidation.

Buy